Characterization of an in vitro engineered ligament model.

In vivo tendon and ligament research can be limited by the difficultly of obtaining tissue samples that can be biochemically analyzed. In this study, we characterize the most widely used in vitro engineered ligament model. Despite previous works suggesting multiple passages change gene expression in 2D primary tenocytes, we found no relationship between passage number and expression of classical tendon fibroblast markers across different biological donors. When engineered into 3D ligaments, there was an increase in maximal tensile load between 7 and 14 days in culture, that corresponded with an increase in collagen content. By contrast, percent collagen increased logarithmically from Day 7 to Day 14, and this was similar to the increase in the modulus of the tissue. Importantly, there was no relationship between passage number and mechanical function or collagen content in the two independent donors tested. These results suggest that the model develops quickly and is reliable across differing passage numbers. This provides the field with the ability to 1) consistently determine functional changes of interventions out to passage number 10; and 2) to time interventions to the appropriate developmental stage: developing/regenerating (Day 7) or mature (Day 14) tissue.

Surface Modification of Cellulose Nanocrystals via RAFT Polymerization of CO2-Responsive Monomer-Tuning Hydrophobicity.

Cellulose nanocrystals (CNCs) were converted into a CO2-responsive composite nanomaterial by grafting poly(dimethylaminoethyl methacrylate) (PDMAEMA), poly(diethylaminoethyl methacrylate) (PDEAEMA), and poly(diisopropylaminoethyl methacrylate) (PDPAEMA) onto its surface using both grafting-to and grafting-from approaches. The zeta potential (ζ) of the graft-modified CNC could be reversibly switched by protonation/deprotonation of the tertiary amine groups simply by sparging with CO2 and N2, respectively. Depending on the grafting density and the molecular weight of the polymer grafts, CNC can form stable aqueous dispersions at either mildly acidic pH (under CO2) or mildly basic (under N2) conditions. Moreover, it was also determined that the CNC hydrophobicity, assessed using phase-shuttling experiments at different pH values, was also dependent on both the grafting density and molecular weight of the polymer grafts, thereby making it possible to easily tune CNC dispersibility and/or hydrophobicity.

Graft Modification of Starch Nanoparticles Using Nitroxide-Mediated Polymerization and the "Grafting to" Approach.

Starch nanoparticles (SNP) were modified with synthetic polymers using the "grafting to" approach and nitroxide-mediated polymerization. SG1-capped poly(methyl methacrylate-co-styrene) (P(MMA-co-S)) copolymers with low dispersity and high degree of livingness were first synthesized in bulk. These macroalkoxyamines were then grafted to vinyl benzyl-functionalized SNP to obtain biosynthetic hybrids. The grafted materials, SNP-g-P(MMA-co-S), were characterized by 1H NMR, FTIR, TGA, and elemental analysis. The total amount of grafted polymer and the grafting efficiency were evaluated for different molecular weights (5870-12150 g·mol-1) of the grafted polymer, the polymer addition approach (batch or semibatch) and the initial polymer loading (2.5, 5, or 10 g polymer/g SNP). The proposed approach presented in this work to graft modify SNP allows for a precise surface modification of the nanoparticles, while permitting that the final properties of the resulting biohybrid to be tunable according to the choice of polymer grafted.

Graft modification of starch nanoparticles using nitroxide-mediated polymerization and the grafting from approach.

Starch nanoparticles (SNP) are attracting increased attention as a renewable bio-based alternative to petroleum-based polymers in the materials community. In this work, we describe the grafting from of SNP with synthetic polymers via nitroxide-mediated polymerization (NMP). Varying amounts of poly(methyl methacrylate-co-styrene) (P(MMA-co-S)), poly(methyl acrylate) (PMA) and poly(acrylic acid) (PAA) were grafted from the surface of SNP in a three-step process. The grafting of synthetic polymers from the surface of SNP was confirmed by FTIR, 1H NMR, elemental analysis and thermogravimetric analysis. These new tailor-made starch-based hybrid materials could find use in paper coatings, adhesives, paints, as well as in polymer latex applications.

Crosslinkable-Chitosan-Enabled Moisture-Resistant Multilayer Gas Barrier Thin Film.

Chitosan-based films exhibit good oxygen barrier that degrades when exposed to high humidity. In an effort to overcome this drawback, a multilayer nanocoating consisting of crosslinkable chitosan (CHQ) and poly(acrylic acid) [PAA] is deposited on polyethylene terephthalate (PET) using layer-by-layer assembly. Chitosan is functionalized with glycidyl methacrylate to introduce acrylic functionalities within the film. The deposited films are crosslinked using a free radical initiator and this crosslinking is confirmed by FTIR and reduced film thickness. A 10-bilayer (BL) crosslinked CHQ/PAA film, which is only 165 nm thick, results in a 36× reduction of the oxygen transmission rate of PET at 90% relative humidity. To achieve these same results without crosslinking, a 15-BL unmodified chitosan (CH)/PAA film, which is almost 5× thicker, must be deposited on PET. This environmentally friendly, transparent nanocoating is promising for food packaging or protection of flexible electronics, especially in high-humidity environments.

Grafting from Starch Nanoparticles with Synthetic Polymers via Nitroxide-Mediated Polymerization.

Nitroxide-mediated polymerization (NMP) is employed to graft synthetic polymers from polysaccharides. This work demonstrates the first successful polymer grafting from starch nanoparticles (SNPs) via NMP. To graft synthetic polymers from the SNPs' surface, the SNPs are first functionalized with 4-vinylbenzyl chloride prior to reaction with BlocBuilder MA yielding a macroinitiator. Methyl methacrylate with styrene, acrylic acid, or methyl acrylate are then grafted from the SNPs. The polymerizations exhibited linear reaction kinetics, indicating that they are well controlled. Thermal gravimetric analysis and spectroscopic techniques confirmed the synthesis of the precursors materials and the success of the grafting from polymerizations. The incorporation of hydrophobic synthetic polymers on hydrophilic SNPs yields new hybrid materials that could find use in several industrial applications including paper coatings, adhesives, and paints.

CO2-Responsive Graft Modified Chitosan for Heavy Metal (Nickel) Recovery.

Chitosan was chemically functionalized with poly(diethylaminoethyl methacrylate) (PDEAEMA) using a grafting to approach to produce a CO2-responsive material for adsorbing metals from wastewater streams. A need for improved economical and greener approaches to recover heavy metals from wastewater streams exists due to increasing resource scarcity. Chitosan is currently used as an adsorbent for heavy metals but suffers from some properties that can be disadvantageous to its effectiveness; it is difficult to effectively disperse in water (which limits available surface area) and to regenerate. We set out to improve its effectiveness by grafting CO2-responsive tertiary amine containing polymers onto the chitosan backbone, with the goals of preparing and assessing a new type of adsorbent based on a novel concept; using carbon dioxide switchable polymers to enhance the performance of chitosan. PDEAEMA chains prepared by nitroxide-mediated polymerization were grafted onto chitosan functionalized with glycidyl methacrylate. In carbonated water, the grafted chitosan displayed improved dispersibility and exhibited a Ni(II) adsorption capacity higher than several other chemically functionalized chitosan variants reported in the literature with the regenerated material having a higher capacity than all physical and chemical derivatives reported in the literature. The results of this study validate the continued development of this material for applications in heavy metal removal and recovery from wastewater streams.